Having problems pairing your Blackweb remote with your device? Do not worry, as we will guide you through the simple steps we followed to program the Blackweb remote and make it fully functional.
When it comes to the top 10 best universal remotes, Blackweb undoubtedly is on that list. Its impressive compatibility with over 500 devices and the capability to control up to 6 devices simultaneously sets it apart. In a previous post, we provided the latest list of Blackweb universal remote codes, but having the codes alone is useless if you’re unaware of the pairing process for your TV, DVD player, soundbar, or other entertainment devices. Before proceeding, make sure that you have the Blackweb universal remote codes on hand, as you will need them for the programming.
Compared to the programming RCA universal remote or GE universal remotes, pairing the Blackweb remote is simpler. You do not have to go through the complicated steps – we’ll guide you through the process in a straightforward way.
How to Program Blackweb Remote
There are two methods that can be used when it comes to programming Blackweb universal remote control to any device:
- Programming with Codes
- Programming without Codes
Below we are going to discuss them in detail.
How to Pair Blackweb Universal Remote with Code
To pair your Blackweb universal remote with your device with the Direct Code Entry method, follow these simple steps:
- Turn ON the device you want to pair with the Blackweb remote (TV, soundbar, streaming player, cable box, etc.).
- Take the Blackweb remote and press and hold the Program button.
- Continue holding the Program button until the Power button light on the remote illuminates. This indicates that the remote is ready for programming.
- Press and release the device button on the remote. Assuming you are pairing it with your television, press the TV button.
- After that, enter the 4-digit code that corresponds to your TV brand.
- If you have entered the valid code, the remote’s light will turn off. If the light remains ON, try again and enter a different code until you find the correct one for your device.
How to Program Blackweb Universal Remote without Code
To program your Blackweb universal remote without a code, you can use the Auto Code Search method, which automatically scans the remote’s database for the correct code. Here’s how to do it:
- Turn ON the smart TV or device you want to pair with the Blackweb remote.
- Point the remote towards the TV and hold the Program button until the Power button light on the remote illuminates.
- Press and release the TV button on the remote. The Power light will blink once.
- Now, hold the OK button on the remote. The remote will start sending different code instructions to the television.
- Continue holding the OK button until your TV turns OFF. When the TV turns OFF, immediately release the OK button and wait a couple of seconds to allow the remote to store the code.
Congratulations! Your Blackweb remote is now successfully connected to your TV.
This method works for various brands such as Vizio, LG, Toshiba, Samsung, Sony, Element, Roku, Fire TV, and other brands listed in the Blackweb remote’s user manual. If you ever need to reprogram the Blackweb remote, the process remains the same as described above.
Last Words
To take full control of your TV, satellite box, soundbar, or any other device using the Blackweb remote, you need to program it correctly. To make things easier for you, we have provided a step-by-step guide to program your Blackweb remote. You can follow either of the methods to ensure your remote works with your desired device. Give the guide a try, and if you get any issues with it, you can share your concerns in the comments section. We are here to help you.
