Are you an Element TV user and using a universal remote? If you do not have an idea how to configure it for your television then follow the below-mentioned methods which help your element TV pair with your element television universal remote codes which are available below. The below methods will be useful for finding the right code for your element universal remote and pairing. Firstly, we are going to add all the working codes for your Element TV remote by using two methods including manual and auto code search etc.
Element Universal Remote Codes List
| Brand Name | Element Remote Codes |
| GE | 4111, 1091, 1651, 5361, 2401, 1025, 5341, 5471, 6021, 5841, 5831, 5421, 5411, 1173, |
| RCA | 13559, 13907, 3559, 1886, 12964, 2183, 14217, 1687, 12183, 11687, 12256, 2964, 11886, |
| Magnavox | 0001, 0073, 0088 |
| Philips | 1091, 4111, 14156, 1918, 5361, 5421, 5831, 3477, 11147, 14023, 1651, 5841, 5471, 13656, 14175, 6021, 10862, 2401, 5411, 5341, 11068, 11568, |
| Westinghouse | 0002, 0143, 0114, 1146 |
| Xfinity | 11886, 13559, 11687, 12183, 12964, 13907 |
| Jumbo | 153, 151, 238, 247, 252, 168, 121, 127, 154, 231, 236, 004, 2183 |
| Cox | 2183, 1687, 1886 |
| Verizon | 3264 |
| Comcast Xfinity | 12183, 10178, 13559, 11687, 11886, 11864, 12964, 12260, 13907 |
| RCA 3 in 1 | 12183, 11687, 12964, 13559, 11886 |
Element 4 Digits Universal Remote Codes
- 1886
- 2183
- 1687
- 3264
Element 5 Digits Universal Remote Codes
10178, 11886, 11687, 12183
Element 3 Digits Universal Remote Codes
005, 004, 046, 028, 043, 048, 076, 096, 155, 051, 127, 151, 153, 154, 231, 236, 238, 247, 252, 168, 121
How To Program Element TV Remote
There are three working ways that can be used to pair your Element TV with your universal remote control, to get started, get one of the above-mentioned codes and you are good to go. Try one of the below methods to program it.
How to Program Element Universal Remote Without Codes
All the universal remote codes have to experience a scanning process in the remote by using the auto search method. It allows it to scan one code to locate the right remote code that is compatible with your remote to program it. Follow the given instructions below:
- “Switch On” the smart device such as “TV” that you want to use using your universal remote.
- “Turn on” the remote to tap on the device button (TV, DVD, CBL and OK/SEL)for 3 seconds. The LED light shows that the device is ready to pair.
- Position the remote towards the device and click on “CH+”& “CH-“ You will see on/off signals on the remote. Press the “up”or “down” keys continuously until the device turns off.
- Click on the “power” key to verify the code. It should turn on the device. If it starts, try to use it and start changing the channel to find out that the remote is programmed correctly.
- To save the code, tap the “device” LED of the Device will blink two times to confirm the storage of the code.
How to Program Element Universal Remote With Manual Method
To program Element universal remote with a manual method, you need to use the keycode and it will find the make and model of your device.
- First of all, you need to “Turn The Device On”
- On your “Element universal remote”, press the TV.
- After that, press and hold the “Setup button” of the Universal Remote until its “Light Flash” (It indicates that it is in “Learning mode”)
- The last step is to enter the “Keycode” that you picked from the programming guide (Instructions Booklet)
- After completing this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- When the screen turns off, you can release the “Power Button”
That is it. your TV will work fine with your universal remote control of Element. If your device is failed to run then repeat the same process with a new code from the above table.
How to Program Element Universal Remote With Code Search
If you were unable to find the code which is compatible with your device, you can use the search mode for the correct one to setup your universal remote. This code is from the manual that forces the remote to go into search mode:
- First “Turn The Device On”
- After that, press and hold the “Setup” button
- Enter the 3-digit code “9-9-1”
- After that, hold down the “Power Button” on the remote and then press the Channel up them until the device or in this situation your tv “Turns Off”
This method can take some extra time that will help you to find the key code. Once you have completed the above process, your remote should be functional.
By using these three methods, you can program your Element TV universal remote with ease.
Final Words:
If the codes are causing interruptions or problems, please use the next one from the list of codes but if you still get issues, leave a comment with your issue and we will respond to it asap.
