Galaxy Matrix TV Universal Remote Codes & Program Instructions

We have added each type of universal remote control codes for Galaxy Matrix TV remote code, GE universal remote and direct tv etc, if you are looking for any type of remote code that can be used to program your Matrix TV then this is an ideal guide that can help you to connect it with your TV.

In this article, we include all types of galaxy matrix universal remote such as a-tv10, a-tv2 urc-1234alb, urc-1518 codes and also the guide to program it, so why are you waiting just find the code and apply them as per the given methods.

Matrix TV Universal Remote 4 Digit Codes

0000
0190
0031
0193
0001
1423
0197

3 Digit Matrix TV Universal Remote Codes

How to Program Matrix TV Universal Remote With Auto-Search

All the universal remote codes have to experience a scanning process in the remote by using the auto search method. It allows it to scan one code to locate the right remote code that is compatible with your remote to program it. Follow the given instructions below:

“Switch On” the smart device such as “TV” that you want to use using your universal remote.
“Turn on” the remote to tap on the device button (TV, DVD, CBL and OK/SEL)for 3 seconds. The LED light shows that the device is ready to pair.
Position the remote towards the device and click on “CH+”& “CH-“You will see on/off signals on the remote. Press the “up”or “down” keys continuously until the device turns off.
Click on the “power” key to verify the code. It should turn on the device. If it starts, try to use it and start changing the channel to find out that the remote is programmed correctly.
To save the code, tap the “device” LED of the Device will blink two times to confirm the storage of the code.

How to Program Matrix TV Universal Remote With Manual Method

To program a Matrix TV universal remote with a manual method, you need to use the keycode and it will find the make and model of your device.

First of all, you need to “Turn The Device On”
On your “Matrix TV universal remote”, press the TV.
After that, press and hold the “Setup button” of the Universal Remote until its “Light Flash” (It indicates that it is in “Learning mode”)
The last step is to enter the “Keycode” that you picked from the programming guide (Instructions Booklet)
After completing this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
When the screen turns off, you can release the “Power Button”

That is it. your TV will work fine with your universal remote control of Matrix. If your device is failed to run then repeat the same process with a new code from the above table.

How to Program Matrix TV Universal Remote With Code Search

If you were unable to find the code which is compatible with your device, you can use the search mode for the correct one to setup your universal remote. This code is from the manual that forces the remote to go into search mode:

First “Turn The Device On”
After that, press and hold the “Setup” button
Enter the 3-digit code “9-9-1”
After that, hold down the “Power Button” on the remote and then press the Channel up them until the device or in this situation your tv “Turns Off”

This method can take some extra time that will help you to find the key code. Once you have completed the above process, your remote should be functional.

I hope that the given codes in the list worked for your Matrix TV to program them and also for your favorite remotes. Those methods can be used to set up your Matrix TV remote control.

Final Words:

If you liked the article then you can share the feedback in the comments, it will help us to make our website better and help the readers who are waiting to get the remote codes. You can also leave the working codes in the comments if they are not available in the list. We will update the article with them.