Universal Remote Codes for Haier TV & Programming

Are you using Haier TV and want to program it then you need to follow the steps in this article that we are going to publish along with Haier tv remote codes and you can use them to pair your universal remote with your Haier television and also make it your favorite remote control too.

Firstly, we will provide some useful codes that you can use, if they do not work, choose another one until you are able to program your universal remote.

Haier TV Universal Remote 4 Digit Codes List

  • 0810
  • 0157
  • 0081
  • 0217
  • 0094
  • 0123
  • 0216

Haier TV Universal Remote (3 Digit Codes)

  • 505
  • 506
  • 718
  • 081
  • 498
  • 216
  • 512
  • 515
  • 640
  • 844
  • 523
  • 500

GE Universal Remote Codes For Haier TV

081, 216, 217, 0081, 5078, 1741, 4851, 0216, 0217, 0157, 1147, 0935, 5120, 5139, 5307, 5380, 5409, 5432, 0671, 0861, 5321, 0921, 2141, 1161, 3831, 6141, 6151

RCA Universal Remote Codes For Haier TV

11748, 1034, 1748, 1749, 3382, 2293, 11570, 4398, 1570, 2309, 11749, 11753, 12309, 13382, 12293, 13204, 14398

Philips Universal Remote Codes For Haier TV

0323, 0709, 0223, 0317

One-For-All Universal Remote Codes For Haier TV

0081, 0157, 0216, 0217

How To Program Haier TV Universal Remote?

Official Method

  • Firstly, turn on your “Haier TV”
  • You should press and hold the “TV” and also “SEL” buttons for more or less “3 Seconds” when that the “Button Blinks”
  • Now “Point the remote” towards the tv and enter “3 digit or 4 digit or 5 digit” codes
  • For verification, press the “Volume+” button after that. If the “TV Volume Increases” then it means the remote has been programmed with your tv.
  • Now click on the “TV” button then it will blink two times to confirm that “The code has been stored”

Your television and universal remote have been programmed and you are allowed to watch your TV now.

If this method did not work by using the codes then you need to use the given method below and it will definitely work.

How to Program Haier TV Universal Remote Without Codes

All the universal remote codes have to experience a scanning process in the remote by using the auto search method. It allows it to scan one code to locate the right remote code that is compatible with your remote to program it. Follow the given instructions below:

  1. “Switch On” the smart device such as “TV” that you want to use using your universal remote.
  2. “Turn on” the remote to tap on the device button (TV, DVD, CBL and OK/SEL)for 3 seconds. The LED light shows that the device is ready to pair.
  3. Position the remote towards the device and click on “CH+”“CH-“You will see on/off signals on the remote. Press the “up”or “down”keys continuously until the device turns off.
  4. Click on the “power” key to verify the code. It should turn on the device. If it starts, try to use it and start changing the channel to find out that the remote is programmed correctly.
  5. To save the code, tap the “device” LED of the Device will blink two times to confirm the storage of the code.

How to Program Haier TV Universal Remote With Manual Method

To program a Haier TV universal remote with a manual method, you need to use the keycode and it will find the make and model of your device.

  • First of all, you need to “Turn The Device On”
  • On your “Haier TV universal remote”, press the TV.
  • After that, press and hold the “Setup button” of the Universal Remote until its “Light Flash” (It indicates that it is in “Learning mode”)
  • The last step is to enter the “Keycode” that you picked from the programming guide (Instructions Booklet)
  • After completing this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • When the screen turns off, you can release the “Power Button”

That is it. your TV will work fine with your universal remote control of Haier. If your device is failed to run then repeat the same process with a new code from the above table.

How to Program Haier TV Universal Remote With Code Search

If you were unable to find the code which is compatible with your device, you can use the search mode for the correct one to setup your universal remote. This code is from the manual that forces the remote to go into search mode:

  • First “Turn The Device On”
  • After that, press and hold the “Setup” button
  • Enter the 3-digit code “9-9-1”
  • After that, hold down the “Power Button” on the remote and then press the Channel up them until the device or in this situation your tv “Turns Off”

This method can take some extra time that will help you to find the key code. Once you have completed the above process, your remote should be functional.

I hope that the given codes in the list worked for your Haier TV to program them and also for your favorite remotes. Those methods can be used to set up your Haier TV remote control.

Final Words:

If you fail with any of these methods, you can always go for the next method and try another code if one is not working. If the codes are not working, you can leave a comment so we will help you.

In addition, if you want to share 3-digit, 4-digit codes of the new universal remote, then leave them in the comment section for other users.

Maxim

I am embracing my passion for remote control and dedicated to sharing comprehensive knowledge about these devices. Welcome to the Remote Codes Master - the ultimate platform that caters to all your universal remote needs.

Leave a Comment