Have you ever used a universal remote if your remote is misplaced? If not, then it is time to get it because it is the best tool when it comes to operating the Television, in this article, you will get the universal remote codes for COBY TV, the codes are available in 3-digit, 4-digit which are working Coby universal remote codes.
Another thing you need to learn is how to program your Coby TV universal remote control to make it functional, so the steps are available below but before you learn that, you should go through codes list to get one in hand. So, let’s have a look at the codes and their compatible devices.
Coby TV 5 Digit Universal Remote Codes
- 01376
- 12003
- 11531
- 11265
- 11538
- 12017
- 10178
- 11314
Coby TV 4 Digit Universal Remote Codes
- 1538
- 2017
COBY TV Universal 3 Digit Remote Codes
604, 005, 505, 626, 627, 594, 633, 593, 720, 607, 699, 205, 625, 266, 165, 267, 256, 056, 257, 262
How to Program COBY Universal Remote Without Codes
All the universal remote codes have to experience a scanning process in the remote by using the auto search method. It allows it to scan one code to locate the right remote code that is compatible with your remote to program it. Follow the given instructions below:
- “Switch On” the smart device such as “TV” that you want to use using your universal remote.
- “Turn on” the remote to tap on the device button (TV, DVD, CBL and OK/SEL)for 3 seconds. The LED light shows that the device is ready to pair.
- Position the remote towards the device and click on “CH+”& “CH-“You will see on/off signals on the remote. Press the “up”or “down” keys continuously until the device turns off.
- Click on the “power” key to verify the code. It should turn on the device. If it starts, try to use it and start changing the channel to find out that the remote is programmed correctly.
- To save the code, tap the “device” LED of the Device will blink two times to confirm the storage of the code.
How to Program COBY Universal Remote With Manual Method
To program a Coby universal remote with a manual method, you need to use the keycode and it will find the make and model of your device.
- First of all, you need to “Turn The Device On”
- On your “Coby Shack universal remote”, press the TV.
- After that, press and hold the “Setup button” of the Universal Remote until its “Light Flash” (It indicates that it is in “Learning mode”)
- The last step is to enter the “Keycode” that you picked from the programming guide (Instructions Booklet)
- After completing this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- When the screen turns off, you can release the “Power Button”
That is it. your TV will work fine with your universal remote control of Coby. If your device is failed to run then repeat the same process with a new code from the above table.
How to Program COBY Universal Remote With Code Search
If you were unable to find the code which is compatible with your device, you can use the search mode for the correct one to setup your universal remote. This code is from the manual that forces the remote to go into search mode:
- First “Turn The Device On”
- After that, press and hold the “Setup” button
- Enter the 3-digit code “9-9-1”
- After that, hold down the “Power Button” on the remote and then press the Channel up them until the device or in this situation your tv “Turns Off”
This method can take some extra time that will help you to find the key code. Once you have completed the above process, your remote should be functional.
Conclusion:
The above list of codes can be used for Coby 5 in 1 universal remote codes, for coby 8 in 1 universal remote, follow the manual setup. I think this article will be helpful for you and if you have any problems while following the given steps above, leave a comment.
