Terk Universal Remote Codes & Program Instructions

If you want everything in your hand in terms of controlling any device, then you have to use these universal codes. That is the reason you need to find the code that works with your TV brand. After doing so, the next step is to program the code selected from the list which is available below. You might want to learn the programming procedure. Then you should keep in mind that you have to enter a 4-digit code from one of the Terk Universal Remote Codes and the process is almost finished.

Terk Universal Remote Codes List

Brand Name Remote Codes
AOC 1196, 1004, 1005, 1006, 1007, 1175, 1082, 1176, 1195, 1237
Admiral 1211, 1001, 1173, 1083
Aventura 1174
Aiko 1016
Akai 1002
Apex 1236, 1240, 1241
Audiovox 1038
Broksonic 1250, 1280
Citizen 1132, 1016, 1004, 1006, 1008, 1171, 1038, 1105, 1196
Craig 1038
Curtis Mathes 1212, 1105, 1000, 1004, 1006, 1015, 1049, 1073, 1171, 1196
Daewoo 1171, 1004, 1005, 1006, 1018, 1017, 1082, 1202, 1196
Daytron 1171, 1004, 1006, 1196
Emerson 1037, 1004, 1006, 1012, 1025, 1023, 1029, 1030, 1035, 1033, 1036,
Envision 1196, 1004, 1006
Fujitsu 1046, 1047
Funai 1038, 1046, 1047
GE 1006, 1100, 1000, 1003, 1004, 1022, 1052, 1054, 1087, 1165, 1166
GoldStar 1082, 1019, 1004, 1005, 1006, 1012, 1056, 1155, 1156, 1172, 1196
Hisense 1237
Hitachi 1145, 1004, 1006, 1012, 1013, 1135, 1136, 1063, 1179, 1185
Infinity 1062, 1130
JVC 1066, 1157, 1012, 1013, 1014, 1054, 1060, 1063, 1123, 1159
Jensen 1006, 1004, 1196
LG 1005, 1082
Magnavox 1088, 1004, 1006, 1008, 1019, 1062, 1069, 1075, 1077, 1130
Mitsubishi 1080, 1004, 1005, 1006, 1022, 1051, 1079, 1082, 1064
Motorola 1003, 1173
Onwa 1038
Panasonic 1350, 1351, 1003, 1054, 1130, 1062, 1160, 1214
Philco 1088, 1008, 1003, 1004, 1005, 1006, 1062, 1069, 1019, 1075, 1077, 1082
Philips 1068, 1088, 1003, 1004, 1008, 1019, 1012, 1062, 1069, 1075, 1087
Pioneer 1179, 1004, 1006, 1136, 1185, 1196
Proscan 1212, 1000, 1100, 1181, 1233
Proton 1012, 1004, 1006, 1196
RCA 1000, 1003, 1004, 1005, 1006, 1007, 1019, 1082, 1096, 1099, 1098
Samsung 1106, 1196, 1004, 1005, 1012, 1015, 1019, 1082, 1105, 1171, 1172
Sansui 1191, 1208, 1282
Sanyo 1196, 1004, 1048, 1073, 1080, 1108, 1169, 1180
Scott 1047, 1046, 1004, 1006, 1012, 1035, 1038, 1196
Sharp 1111, 1004, 1006, 1012, 1026, 1029, 1095, 1112, 1171, 1173, 1196
Signature 1001
Sony 1216, 1002, 1205, 1218
Sylvania 1076, 1008, 1004, 1006, 1019, 1062, 1068, 1075, 1077, 1088, 1130
Symphonic 1033, 1038, 1189
Teknika 1014, 1001, 1004, 1005, 1006, 1008, 1013, 1047, 1016, 1038, 1046, 1063
Toshiba 1118, 1160, 1049, 1071, 1072, 1073, 1105, 1109, 1117, 1283
Yahama 1196, 1004, 1005, 1006, 1019, 1082
Zenith 1154, 1004, 1083, 1151, 1152, 1196, 1210, 1217

How to Program Terk Universal Remote With Auto-Search

All the universal remote codes have to experience a scanning process in the remote by using the auto search method. It allows it to scan one code to locate the right remote code that is compatible with your remote to program it. Follow the given instructions below:

  1. “Switch On” the smart device such as “TV” that you want to use using your universal remote.
  2. “Turn on” the remote to tap on the device button (TV, DVD, CBL and OK/SEL)for 3 seconds. The LED light shows that the device is ready to pair.
  3. Position the remote towards the device and click on “CH+”“CH-“You will see on/off signals on the remote. Press the “up” or “down” keys continuously until the device turns off.
  4. Click on the “power” key to verify the code. It should turn on the device. If it starts, try to use it and start changing the channel to find out that the remote is programmed correctly.
  5. To save the code, tap the “device” LED of the Device will blink two times to confirm the storage of the code.

How to Program Terk Universal Remote With Manual Method

To program a Terk universal remote with a manual method, you need to use the keycode and it will find the make and model of your device.

  • First of all, you need to “Turn The Device On”
  • On your “Terk universal remote”, press the TV.
  • After that, press and hold the “Setup button” of the Universal Remote until its “Light Flash” (It indicates that it is in “Learning mode”)
  • The last step is to enter the “Keycode” that you picked from the programming guide (Instructions Booklet)
  • After completing this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • When the screen turns off, you can release the “Power Button”

That is it. your TV will work fine with your universal remote control of Terk. If your device is failed to run then repeat the same process with a new code from the above table.

How to Program Terk Universal Remote With Code Search

If you were unable to find the code which is compatible with your device, you can use the search mode for the correct one to setup your universal remote. This code is from the manual that forces the remote to go into search mode:

  • First “Turn The Device On”
  • After that, press and hold the “Setup” button
  • Enter the 3-digit code “9-9-1”
  • After that, hold down the “Power Button” on the remote and then press the Channel up them until the device or in this situation your tv “Turns Off”

This method can take some extra time that will help you to find the key code. Once you have completed the above process, your remote should be functional.

We hope that you are able to pair your Terk TV to your remote by following the above methods and codes. Those methods can be used to set up your Terk remote.

Conclusion:

So, you can simply apply these universal codes without wasting much time on your electrical device in order to watch your favorite shows without any interruption. If the codes are not working then you can let us know.

Maxim

I am embracing my passion for remote control and dedicated to sharing comprehensive knowledge about these devices. Welcome to the Remote Codes Master - the ultimate platform that caters to all your universal remote needs.

Leave a Comment