Hey readers. We are going to share the latest codes of the Zenith Universal remote. We have made it possible and we have shared every zenith universal remote code in the list below. If you do not have any idea how to program it then we have listed the method too. You just have to read it follow it and then enter the codes and it will start working once it is connected to each other. So, let’s begin.
Zenith TV Universal Remote Codes List
401, 502, 101, 142, 149, 177, 201, 224, 225, 229, 237, 153, 154, 172, 460, 461, 498, 501, 521
Zenith Universal Remote Codes List
| Brand Name | Remote Code |
| Craig | 805, 906 |
| Daewoo | 311, 221, 002, 102, 110, 203, 214, 303, 314 |
| Emerson | 105, 005, 002, 003, 004, 006, 014, 104 |
| Fisher | 619, 506, 606, 902 |
| Fujitsu | 206 |
| Funai | 805, 206, 906 |
| GE | 601, 310, 002, 007, 018, 107, 318, 502, 719, 803 |
| Goldstar | 102, 117, 207, 002, 916, 217, 307, 502, 713, 818 |
| Hitachi | 415, 310, 002, 016, 116, 218, 315, 502, 507, 516, 619 |
| JVC | 606, 902, 007, 108, 208, 308, 417, 502, 510, 617, 702 |
| Magnavox | 402, 408, 002, 008, 109, 118, 209, 309, 502, 508, 510 |
| Memorex | 701, 102, 502, 506, 601 |
| Mitsubishi | 509, 803, 002, 102, 114, 206, 502, 510, 619, 709 |
| Panasonic | 901, 017, 516, 618, 807 |
| Philips | 508, 310, 002, 009, 109, 202, 209, 221, 402, 408, 502 |
| Proscan | 601, 719 |
| RCA | 411, 502, 002, 102, 211, 302, 320, 402, 406, 511, 514 |
| Samsung | 908, 502, 002, 102, 103, 112, 212, 512, 702, 818 |
| Sansui | 215 |
| Sanyo | 506, 902, 002, 312, 412, 619 |
| Sharp | 712, 111, 002, 013, 502, 812, 813, 918 |
| Sony | 202, 801 |
| Sylvania | 408, 309, 002, 009, 109, 117, 209, 402, 502, 508, 717 |
| Symphonic | 520, 117, 904, 906 |
| Toshiba | 902, 510, 112, 313, 413, 506, 512 |
| Zenith | 701, 512, 008, 117, 311, 405, 407, 601, 713, 916 |
RCA Universal Remote Codes For Zenith
1151, 1463, 1000, 1001, 1004, 1051, 1083, 1152, 1153, 1154, 1196, 1210, 1217, 1424, 1427, 1428, 1449, 1464
GE Universal Remote Codes For Zenith
0001, 0338, 0091, 0138, 0245, 0004, 0288, 0058, 0121, 0038, 0247, 0039, 0266, 0134., 0153, 0078, 0227, 0111, 0009, 0131, 0252, 0226, 0310, 0050, 0023, 0358, 0059, 0135, 0064
One-For-All Universal Remote Codes For Zenith
0004, 0131, 0153, 0121, 0064, 0009, 0138, 0111, 0091, 0134., 0078, 0059, 0038, 0050
Philips Universal Remote Codes For Zenith
0002, 0008, 0126, 0903, 0713, 0405, 0430, 0228, 0502, 0507, 0701, 0606, 0710, 0826, 0326, 0407, 0505, 0916, 0435, 0437, 0714, 0712, 0324, 0632, 0015, 0409, 0415, 0115, 0224
Magnavox Universal Remote Codes For Zenith
- 0077
- 0015
How to Program Zenith Universal Remote Without Codes
All the universal remote codes have to experience a scanning process in the remote by using the auto search method. It allows it to scan one code to locate the right remote code that is compatible with your remote to program it. Follow the given instructions below:
- “Switch On” the smart device such as “TV” that you want to use using your universal remote.
- “Turn on” the remote to tap on the device button (TV, DVD, CBL and OK/SEL)for 3 seconds. The LED light shows that the device is ready to pair.
- Position the remote towards the device and click on “CH+”& “CH-“You will see on/off signals on the remote. Press the “up”or “down” keys continuously until the device turns off.
- Click on the “power” key to verify the code. It should turn on the device. If it starts, try to use it and start changing the channel to find out that the remote is programmed correctly.
- To save the code, tap the “device” LED of the Device will blink two times to confirm the storage of the code.
How to Program Zenith Universal Remote With Manual Method
To program a Zenith universal remote with a manual method, you need to use the keycode and it will find the make and model of your device.
- First of all, you need to “Turn The Device On”
- On your “Zenith universal remote”, press the TV.
- After that, press and hold the “Setup button” of the Universal Remote until its “Light Flash” (It indicates that it is in “Learning mode”)
- The last step is to enter the “Keycode” that you picked from the programming guide (Instructions Booklet)
- After completing this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- When the screen turns off, you can release the “Power Button”
That is it. your TV will work fine with your universal remote control of Zenith. If your device is failed to run then repeat the same process with a new code from the above table.
How to Program Zenith Universal Remote With Code Search
If you were unable to find the code that is compatible with your device, you can use the search mode for the correct one to set up your universal remote. This code is from the manual that forces the remote to go into search mode:
- First “Turn The Device On”
- After that, press and hold the “Setup” button
- Enter the 3-digit code “9-9-1”
- After that, hold down the “Power Button” on the remote and then press the Channel up them until the device or in this situation your TV “Turns Off”
This method can take some extra time that will help you to find the key code. Once you have completed the above process, your remote should be functional.
Final Words:
In this article, we have listed each and every Universal Remote Codes for Zenith, if you are having any troubles regarding universal remote codes or if we are not able to mention any codes then you can write us a comment and we will have a look at the issues and also we will add those Zenith remote codes.
